咨询热线

400-6808-138
首页 > 标准大全 > ASTM C1184−14标准详情
相关测试仪器

ASTM C1184−14测试标准

  本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ASTM C1184−14标准详细信息或ASTM C1184−14具体测试方法,欢迎致电【400-6808-138】与我们技术人员联系或给我们留言,我们将为您相关的技术支持。

ASTM C1184−14测试申请

翁开尔公司目前可提供ASTM C1184−14测试服务,如需外发样品进行测试,可在线填写《ASTM C1184−14测试申请》【测试申请表】,我们会有专门的负责同事与您联系。

ASTM C1184−14标准介绍

1. Scope

1.1 This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.

1.2 Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.

1.3 The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.

1.4 Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.

2. Referenced Documents

ASTM Standards

C603 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants

C661 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C679 Test Method for Tack-Free Time of Elastomeric Sealants

C717 Terminology of Building Seals and Sealants

C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants

C1401 Guide for Structural Sealant Glazing

C1442 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

European Organization for Technical Approvals Document

ETAG No. 002 Guideline for European Technical Approval for Structural Sealant Glazing Systems

以上标准信息来自互联网搜索整理,如需了解完整的ASTM C1184−14的信息或ASTM C1184−14标准解读,欢迎致电【400-6808-138】详询。

符合 ASTM C1184−14 标准试验箱

  • 氙灯老化箱图片 氙灯老化箱

    Q-SUN Xe-1-B是一款适合小型实验室的氙灯老化箱,其命名规程B指的是改型号的产品具有背部喷淋功能,这意味着在SAE部分标准的测试中尤其有用。

    Q-SUN Xe-1-B 马上询价
  • 氙灯耐候试验机图片 氙灯耐候试验机

    Q-SUN Xe-1-SCE氙灯耐候试验机是一款支持水喷淋功能和制冷功能的氙灯加速老化设备

    Q-SUN Xe-1-SCE 马上询价
  • 氙灯加速老化试验箱图片 氙灯加速老化试验箱

    Q-sun Xe-1-BCE氙灯加速老化试验箱配有全光谱氙弧灯、太阳眼辐照度控制系统,该型号的氙灯加速老化试验箱同时具有背部喷功能。

    Q-sun Xe-1-BCE 马上询价
  • 氙灯老化试验箱图片 氙灯老化试验箱

    Q-SUN Xe-3-HSE氙灯老化试验箱具有全光谱光照功能、湿度控制以及喷淋功能,其命名规则为湿度控制(H)、喷淋(S)。

    Q-SUN Xe-3-HSE 马上询价
  • 氙灯耐气候试验箱图片 氙灯耐气候试验箱

    Q-SUN Xe-3-HDSE氙灯耐气候试验箱具有湿度控制、以及双喷淋功能,其命名规则为湿度(H)、双喷淋(D)、喷淋(S)。

    Q-SUN Xe-3-HDSE 马上询价
  • 氙灯加速老化箱图片 氙灯加速老化箱

    Q-SUN Xe-3-H氙灯加速老化箱是一款经济的氙灯加速老化箱,具备有湿度控制功能,但是该型号的产品不具备水喷淋功能。

    Q-SUN Xe-3-H 马上询价