咨询热线

400-6808-138
首页 > 标准大全 > ISO 4665-2016标准详情
相关测试仪器

ISO 4665-2016测试标准

  本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ISO 4665-2016标准详细信息或ISO 4665-2016具体测试方法,欢迎致电【400-6808-138】与我们技术人员联系或给我们留言,我们将为您相关的技术支持。

ISO 4665-2016测试申请

翁开尔公司目前可提供ISO 4665-2016测试服务,如需外发样品进行测试,可在线填写《ISO 4665-2016测试申请》【测试申请表】,我们会有专门的负责同事与您联系。

ISO 4665-2016标准介绍

ISO 4665-2016是关于硫化或热塑性橡胶-耐候性测试方法。 本标准规定了以荧光紫外灯和冷凝装置模拟天然气候的太阳紫外光、温度和冷凝水等老化因素的一种人工气候老化试验方法。

本标准适用于硫化橡胶在紫外光照和冷凝作用交替条件下暴露的耐候性试验。最新标准ISO 4665-2016发布于2016年1月。

ISO 4665-2016英文介绍

ISO 4665:2016 specifies methods for the exposure of vulcanized or thermoplastic rubbers to natural or artificial weathering and methods for the determination of changes in colour, appearance, and physical properties resulting from exposure.

1 Scope

This International Standard specifies methods for the exposure of vulcanized or thermoplastic rubbers to natural or artificial weathering and methods for the determination of changes in colour, appearance, and physical properties resulting from exposure.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour

ISO 877-1:2009, Plastics — Methods of exposure to solar radiation — Part 1: General guidance

ISO 877-2:2009, Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass

ISO 877-3:2009, Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

ISO 1431-1, Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

ISO 4892-1, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

ISO 4892-3, Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

ISO 4892-4, Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

ISO 18314-1, Analytical colorimetry — Part 1: Practical colour measurement

ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 877 and ISO 4892 and the following apply.

3.1control

material exposed alongside the test material for comparison

Note 1 to entry: The control, for example, may be a material of similar or related composition to the test material or a material having a known response to the exposure conditions.

3.2file test piece

portion of the material to be tested which is stored under conditions in which it is stable and is used for comparison between the exposed and the original state

3.3masked area

portion of the exposed test piece which is protected from light exposure by masking

3.4weathering reference material

reference material whose weathering degradation properties are well documented and repeatable when exposed to identical conditions

3.5exposure stage

interval of exposure between determinations of change in properties, expressed as time or radiant exposure

以上标准信息来自互联网搜索整理,如需了解完整的ISO 4665-2016的信息或ISO 4665-2016标准解读,欢迎致电【400-6808-138】详询。

符合 ISO 4665-2016 标准试验箱

  • 氙灯耐气候试验箱图片 氙灯耐气候试验箱

    Q-SUN Xe-3-HDSE氙灯耐气候试验箱具有湿度控制、以及双喷淋功能,其命名规则为湿度(H)、双喷淋(D)、喷淋(S)。

    Q-SUN Xe-3-HDSE 马上询价
  • 氙灯老化试验箱图片 氙灯老化试验箱

    Q-SUN Xe-3氙灯老化试验箱能再现全光谱太阳光和雨水造成的损害。在几天或几周之内,Q-SUN试验箱就能够再现数月或数年户外老化造成的损害

    Q-SUN Xe-3 马上询价