耐候性试验
Weathering Testing咨询热线
18566398802ASTM D1654-08(2016)描述了高性能有机涂料的测试程序和性能要求,这类涂料适用于建筑产品(铝合金型材和板材)。
1.1 This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect to corrosion, blistering associated with corrosion, loss of adhesion at a scribe mark, or other film failure.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM Standards
B117 Practice for Operating Salt Spray (Fog) Apparatus
D610 Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D714 Test Method for Evaluating Degree of Blistering of Paints
D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D870 Practice for Testing Water Resistance of Coatings Using Water Immersion
D1014 Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1735 Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D2247 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
D2803 Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D4141 Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
D4585 Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4587 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D5894 Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
D6695 Practice for Xenon-Arc Exposures of Paint and Related Coatings
D7087 Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
E3 Guide for Preparation of Metallographic Specimens
G85 Practice for Modified Salt Spray (Fog) Testing
G87 Practice for Conducting Moist SO2 Tests
温馨提醒:本ASTM D1654-08(2016)可能存在更新的版本,建议寻找ASTM D1654-08(2016)的发行商确认。
Q-FOG CCT1100盐雾腐蚀试验机具有1103升大容量测试能力,可在一台机器中实现高湿度、干燥、静止、加热等多个不同的循环测试条件。
Q-FOG CCT1100 马上询价Q-FOG CRH1100是一款的具有相对湿度控制功能和溶液喷淋功能的盐雾试验箱.
Q-FOG CRH1100 马上询价Q-LAB CCT600盐雾腐蚀试验箱不仅具备了SSP 盐雾试验箱的所有优点,同时还增加100%湿度功能。CCT600测试样品容量为640升
Q-FOG CCT600 马上询价Q-FOG 盐雾实验机是最可靠、最易用、最被广泛认可的盐雾实验机。
CCT 1100 马上询价